Car buying guide
Used car purchase inspection. alternator failure case
A Honda Civic used car inspection case study. The dealer claimed the vehicle repair were all done and even posted the repair photos on a major Korean used car platform. However, alternator was measured at12.69V. Trust but always verify, that is the best way in any used car inspection process.

Please follow the simple steps to check the alternator status.
First, connect the digital multi-meter (DMM) plus to the alternator b+ terminal (plus). Alligator clips are good for this purpose. Next, connect the minus of the DMM to the alternator case and then measure the voltage. measure
- Measure the voltage in the idle state after engine start. The voltage should be between 13.5V and 15.0V.
- At 3000 RPM, the voltage should not exceed 15.0.
Note: The above is for general 12V vehicles, and may not apply to 48V vehicles, BMS and other tuning vehicles.

베콤카 캔 통신 워크샵과 구글 인공지능 검색결과,
캔 통신? 신호등 과 같다,
정비사세트B+는 판매 완료되었습니다. 다음 수입물량은 약 30일 전후에 통관 예정입니다.,
자동차 온라인커뮤니티의 단골질문 'CEL, 엔진경고등' 에 대하여 생각해본다,
혼다차량 벨브간극이 중요, 벨브간극 과 고장코드 P0172 P0175 상관관계,
What are the simplest ways to inspect the engine condition?,
메르세데스 벤츠 진단고장코드가 0637, 0645, 0653, 0314, 0322, 0070이다.,
자동차배기가스(EVAP) 검사 참고사항, 삼성SM6 혼다 CR-V 5세대 1.5T터보차량,
(1)Login for comments